Home  

Important Tips When Shopping For Manufactured Home Dryer Receptacles


Generally, most home dryer receptacles are 15- or 20 –amp, 120 or 240V branch circuits. In this regard, it is important to note that electrical codes do require that all such circuits be grounded using a three (3) prong receptacle. Always keep in mind that the voltage and amperage of any receptacle is usually marked on the front. Therefore, make sure you accurately compare the overall power needs of the appliance in question to the output of the receptacle you want to purchase.

In addition to the above, you should be able to know the type of wire your receptacle is going to connect to. In this regard, you should always keep in mind that a receptacle that’s stamped AL-CU has the ability of accommodating both aluminum and copper wire. In the event that the receptacle is unmarked or even if there is a slight slash through the AL, then you should only use copper wire. It is worth mentioning at this juncture that most manufacturers go an extra mile to ensure that they prevent instances of a wrong appliance being plugged into a wrong receptacle by tailoring the plugs to some special receptacles.

It is also important to know the type of receptacle that you need to install. The most common types include the 120V receptacle, the 240Vreceptacle, the 120/240V receptacle and the GFCI receptacles. The 120V receptacle usually has two identical outlets, with each outlet having three plug in slots as well. The 120/240V does provide both the 120 and 240 Volts, they have 4 plug in slots with one being neutral, one that’s grounding and one that’s hot. The 240V receptacles are not for use with standard appliances and are reserved for items such as power tools. The unit does have two hot slots and a grounding slot as well. The GFCI receptacle is a unique piece that’s required in wet or damp areas. You should therefore be sure about the type of dryer unit you want to purchase before you go shopping.

You should therefore not be surprised to see equipment such as a table saw or some heavy duty dryers having a very unique prong configuration. This is quite common for large appliances which tend to require a combination of 120/240Volt receptacle; this usually includes the 120Volt to power the timer and other minor functions while the 240V powers the appliance itself. When you are buying a receptacle, you should pay close attention to the labeling which may include wordings such as residential, contractor or spec: these tend to be of a higher quality even though they are bit more expensive.

For wet use, make sure you opt for GFI or GFCI (Ground Fault Circuit Interrupter) receptacles. These are required in areas of a home that’s damp and exposed so as to protect the home from any serious shock that may occur if electricity. These usually act like some super sensitive circuit breakers. Such units are identified by the test and reset buttons which are placed on the face. Whenever the amounts of outgoing and incoming current are not equal, the GFCI tends to sense it and then shut itself down or even in other instances shut other receptacles on the same circuit. If the unit stops to work, for one reason or the other, you just push the test button so as to ensure that the device is functioning properly.

Here are some important and popular manufactured home dryer receptacles in the market. They include but are not limited to the following:

1) Product Name: Almond Duplex Receptacle

Product Price: $ 1.26

Product URL: https://is.gd/8R0Ge5

Product Details: these are ideal for multi-gang installations and are available in different colors and configurations as well so as to match your overall configuration. It is also important to mention that the pieces can easily snap together for a finished, unique look.

2) Product Name: Wirecon White Self receptacle

Product Price: $ 3.99

Product URL: https://is.gd/xua1nW

Product Details: this is a 15AMP, 125V AC does have some adjustable mounting ears that make it easy to install. The unit is ideal for both end of line or in line use for the dryer installation.

3) Product Name: Pass and Seymour Self Receptacle

Product Price: $ 5.59

Product URL: https://is.gd/WsoaWT

Product Details: this unit is quite functional and represent styles and form factors that have successfully stood the test of time. This is a 15AMP, 125 Volt AC with adjustable mounting ears that make installation quite easy.



Pembroke Pines, Guymon, El Campo, Bedford Heights, Harper Woods, Illinois, La Mesa, Gatesville, Bainbridge, Stamford, Kingston, Muscle Shoals, Dickson, Marina, Destin, Seminole, Kings Mountain, Fargo, Fernandina Beach, Gadsden, Tarpon Springs, Barnstable Town, Ramsey, Rhode_Island, La Puente, Lafayette, Saco, Indiana, Linden, Chicago Ridge, Whitehall, Waynesboro, Bristol, Dyer, Elmwood Park, Bullhead City, Paradise Valley, Radcliff, Washington, Freehold, Leeds, Alabama, Corvallis, Moses Lake, Frankfort, Chino, North Carolina, Michigan, Colorado, Monterey, South Jordan, Perrysburg, North Dakota, Chicago Heights, Warsaw, Galesburg, Massachusetts, Las Vegas, Southern Pines, Pleasanton, Little Chute, Sugar Hill, Garden City, South Euclid, Lisle, Tennessee, Richmond, Manhattan Beach, New London, Los Altos, Nashville-Davidson metropolitan government (balance), Lyndon, Ephrata, Haltom City, Parkland, Mount Pleasant